Features:
* Excellent thixotropy, non-drip for horizontal, vertical and overhead applications
* Very good resistance to age, chemical corrosion and water
* After cure time low shrinkage, wide range of mixing proportion, long time operation
* Three types of cure condition: normal temperature, low temperature, wet environment
* Excellent properties of bonding strength, toughness, peeling strength and impact resistance
* Moderate viscosity and good flowability , easy for paste
* Fast and easy stirring ensures accurate mixing proportion 2:1, when properly mixed, adhesive will be an even color for use
* Mixed adhesive should be used up within 10~60 minutes (depending on specific ambient temperature), the density is about 1.75~1.80 g/cm3 (cured), gel time is about 1.5~6 hours
*Suitable for rough concrete surface with spalling, corrosion, honeycomb
* Concrete damage caused by external force, restore and repair the damaged edge of concrete structure
* Repair the concrete surface with porous water seepage by pasting reinforcement
* Repair, fill the cracks and holes in the concrete structure
* Concrete replacement reinforcement
* Concrete surface repair and leveling in steel and carbon fiber bonding reinforcement
* Structural cracks grouting
* waterproof and leak-stopping engineering
Operating environment:
* Dry condition
* Wet condition
* Underwater condition
Caution：
* Mix the adhesive well according to its weight proportion strictly
* Construction crew should take steps of protective measures to keep it from eyes
* Remaining adhesive cannot be poured into original barrels
Packing:
* Two kinds of package, 45kg (A+B two barrels)/pair; 10kg (A+B two barrels)/pair
Storage:
* Shelf life: At least 12 months from date of manufacture in unopened container when store in dry and well-ventilated place. Please store in ambient temperature from 5 ℃ to 40 ℃, away from open flame, heating devices
* Adhesive specialized for low temperature can be stored in ambient temperature from -5 ℃ to 40 ℃
* Handle with care, protect from rain, sunlight and place upward during loading and unloading transportation
Standard: GB50367-2013, GB50728-2011
NJMKT promises to meet the technical requirements of the following GB50367-2013 "Design code for concrete structure reinforcement" and GB50728-2011 "Technical code for safety identification of reinforcement materials for engineering structures".
| NO. | Item Name | Standard Requirement (Adhesive Grade A) | Test Result | Single item assessment |
| 1 | Tensile strength (MPa) | ≥38 | 39 | Qualified |
| 2 | Tensile modulus of elasticity (MPa) | ≥2400 | 3221 | Qualified |
| 3 | Elongation（%） | ≥1.5 | 1.53 | Qualified |
| 4 | Bending strength (MPa) | ≥50, and without brittle failure | 53, and without brittle failure | Qualified |
| 5 | Compressive strength (MPa) | ≥70 | 86 | Qualified |
