ES | CN
+86 025 8665 1110
Home >> News

Can Barreled Planting Glue Be Used For Guns?

Sep. 18, 2019

“I recently bought a barrel of reinforced adhesive which is used to reinforce the ground, but I don’t know how to inject it. Can it be injected with an injection gun?” In the early morning, Mr. Wang in Nanjing hurried to call us for a telephone consultation. Of course, this problem is not difficult for us.


1.png
Reinforced Adhesive Manufacturer

Mankate technician is demonstrating adhesive injection method at a construction site.


Can Barreled Reinforced Adhesive be injected by injection gun?


Barreled reinforced adhesive can certainly be injected ! However, before using the injection gun, you need to mix the A and B components in a clean bucket according to the requirements. If you don't know the amount of glue in advance, you should try to mix it as many times as possible to avoid unnecessary waste. Because the barreled adhesive is easy to cure, the epoxy resin from famous brands will be better. For example, the operation time of Nanjing Mankate barreled reinforced adhesive is 30 minutes. You can't continue to use the adhesive which is over the use time. It will cause a lot of trouble.


2.png
Reinforced Adhesive Manufacturer

Mankate barreled planting bar adhesive, you can use the injection gun and save money.


However, it can be seen that although the price of barreled reinforced adhesive may be lower, there are still many exquisites in use, and it is difficult to strictly ensure that the ratio meets the requirements in actual operation. So it also leads to the reinforcement effect may not be effectively guaranteed. If you use Mankate injection-type adhesive, you can avoid these problems. The two components of Mankate Injectable Adhesive can be fully mixed in the static mixer without manual. With glue, reduce the amount of operation, improve the efficiency of planting ribs, and the unused Reinforced Adhesive can be used next time. It has the advantages of energy saving and environmental protection. 


3.png

Reinforced Adhesive Manufacturer


Mankate injection-type planting bar adhesive helps you improve quality and reduce waste!


As a professional Reinforced Adhesive Manufacturer, Mankate adopts strict process production whether it is barrel-packed reinforced adhesive or injection-type reinforced adhesive. The construction quality is guaranteed, and the construction plan is provided free of charge. Free technical support and after-sales service are available for you to use. You can buy a better planting bar adhesive with the lowest price. What are you waiting for? Quickly pick up the phone to buy it! Mankate's one-stop service hotline: 400-894-5118


Looking for more details of Planting Rebars, welcome to follow our website for useful information.