ES | CN
+86 025 8665 1110
Home >> News

Carbon cloth reinforcement method of cast-in-place board cracks

Nov. 01, 2017

We have just spent the National Day for a month. Then a customer wrote to us and said that he bought a second-hand apartment during the National Day. When he moved into his house happily, he found that the cast-in-place board had cracks. The re-painting had no problem. But he was afraid of affecting the security. He asked us if there was a more effective way when encountering this situation. In fact, in recent years, in the civil buildings of the reinforced concrete, because of the quality of commercial housing, the problem of cast-in-place cracks has repeatedly appeared. And it has been criticized one of the stains in the modern commercial housing. Because if we do not pay attention to the cracks, they will destroy the overall structure, causing the corrosion of steel bars and affecting the durability of houses.

20171030213652_5984.jpg

 

There are several reasons for the occurrence of cracks in the cast-in-place slabs. The most common cracks are caused by uneven settlement of the foundation, strength of concrete, plate thickness and other factors, which we call stress cracks. Some are caused by the temperature or cement quality problems. We call them non-stressed cracks.

     

For the stress cracks, we need to first cut the crack, pour the epoxy resin into the seam with pressure and close it. And then we paste it with carbon cloth to reinforce it. When pasting the carbon cloth, we should pay attention to the single crack. In addition to pasting along the seam, but also in the vertical direction of the seam, we should also paste the well-shaped to the intersecting multi-seams. The spacing should be the same as the cloth width. (The appropriate width of cloth is about 300mm)

 

 For non-stress cracks, if there are cracks only on the surface, you can clean up the cracks. After being dry, we use epoxy resin to fill the seam or brush the surface and seal it. During the construction, if we find cracks before the final condensate, we can wipe it.

 

If the crack area is large, we need to conduct a certain data analysis. Nanjing Mankate Technology Department can analyze for you freely and provide you the technical reference program. If the safety of inspection is not ideal, it is recommended to add a layer of steel mesh on the floor, and then use epoxy resin to fill the cracks and seal them. Finally in the bottom of the board we use carbon cloth to paste into a well shape. The spacing is the same as the cloth width.

 

The above is applicable to the general family of cast-in-place slabs carbon cloth reinforcement method. This method is simple and easy construction, and security is guaranteed. Here we recommend the Nanjing Mankate's carbon cloth. Mankate carbon cloth is China BrandName, underwritten by the Ping An Insurance Company. It has been widely used in Nanjing Metro Line 3, ChengYa high-speed, China Aerospace Building, Nanjing Gulou Hospital, the Great Baoen Temple and other projects. If you are interested, please call 400-894-5118. We will be happy to serve you.

Hotline: 400-894-5118

Editor: Nanjing Mankate

Copyright by www.njmkt, net, for reprint, please indicate the source!