Recently, many people have bought a house. After buying a house, the next step is house renovation. However, in many cases, the layout of the house must be remodeled, and sometimes even opening holes on the load-bearing wall! How to strengthen the load-bearing wall through the hole has become a problem that many people are worrying about. In fact, 200g carbon fiber cloth reinforcement can help!
Many people think that it is just a hole in the wall, why is it necessary to make such reinforcement. If you break the load-bearing wall during the decoration, it will have a bad effect on the load transmission. If there is a problem with the bearing capacity of the house, structural damage will occur. It is a matter of time before the wall cracks, but it is more horrible to collapse. If you want to make a hole in the load-bearing wall, you must think about how to strengthen it next.
Mankate 200g carbon fiber cloth, better both inside and outside, is a good helper for reinforcement!
Don't know how to strengthen it? Based on the experience of many masters and the recommendations of the industry, Mankate 200g carbon fiber cloth is definitely an excellent reinforcement choice for your load-bearing wall. 200g carbon fiber cloth is a new type of lightweight and high-strength building material, which will not affect the overall aesthetics of the house after construction, and the high-quality Mankate 200g carbon fiber cloth is also non-toxic and odorless. It can be used while living, and there is no need to use it during construction. Large machines will not cause new damage to the house. All in all, the reinforcement of load-bearing walls with Mankate 200g carbon fiber cloth from not only has a high safety factor, but also is easy to construct.
There are very few 200g carbon fiber cloths on the market that have passed the test.
Mankate 200g carbon fiber cloth has passed the rigorous "Technical Specifications for Safety Evaluation". We must know that there are really very few 200g carbon fiber cloths on the market that can pass this test.
As we all know, the strength requirement of 200g carbon fiber cloth for wall reinforcement is relatively high, because it directly affects the increase of the bearing capacity. The strength of Mankate 200g carbon fiber cloth is more than 4000 MPa, far exceeding the standard of first-class 200g carbon fiber cloth. A piece of high-quality 200g carbon fiber cloth can, in a sense, be too many pieces of ordinary quality 200g carbon fiber cloth. The key is that its quality also determines that it can save you a lot of 200g carbon fiber cloth reinforcement engineering costs. It deserves your choice!
Reference case of Mankate 200g carbon fiber cloth
China's laws have clearly stipulated that private individuals cannot modify the load-bearing structure of houses without permission. After all, opening holes in the load-bearing wall can easily harm others if they are not handled properly. But if you have already opened the hole, don't panic. Contact Mankate immediately to inquire about 200g carbon fiber cloth reinforcement. Our professionals will give you advice. Our hotline: 400-894-5118.
Link to this article: https://www.njmkt.net/Article/czqkdhrhjgn.html
(Editor: Nanjing Mankate, if you need to reprint, please indicate the source)
