For residential decoration, waterproof leak repair is very important. Because if there is a leak, the repair work is large. It is necessary to cut the ground and redo the waterproof layer, and it will greatly affect the neighborhood relationship. Therefore, it is best to use one-off waterproofing for residential buildings, and the craftsmanship and waterproofing materials must be selected so that they can last for a long time. So what do concrete waterproofing for houses need?
1. Requirements for waterproof leak repair materials: Water leak repair, as the name suggests, the materials used must also be waterproof and corrosion resistant. Generally, seam sealant or carbon fiber cloth is recommended. Mankate seam sealant has the following characteristics, low viscosity and strong permeability. It can be injected into 0.1mm wide micro-cracks; high-strength anti-corrosion, strong resistance to acid and alkali. So it is suitable for general home waterproofing. If the cracks generated are relatively large, we recommend Mankate carbon fiber cloth. Mankate carbon fiber cloth has stable chemical properties, acid and alkali resistance, corrosion resistance, and 50 years of certification against humidity and heat aging. It is generally used safely by families. If there is no problem in the construction process, water leakage will not occur in the future.
2. Requirements for construction technology: first clean the surface, especially the toilet, and expose the concrete first. Be sure to keep it dry, dust-free and level. If it is not level enough, you can use leveling glue (repairing glue) to repair and level. Apply the adjusted primer evenly to the surface to be reinforced with a brush, wait until the fingers are dry (not sticky to the touch) → use leveling glue (repair glue) to correct the inconsistencies, and wait for the leveling glue to harden → A good dipping glue is applied evenly on the surface to be reinforced with a brush. Then stick the cloth, roll on the surface of the cloth with a roller to infiltrate and defoam → roll the adjusted impregnating adhesive on the surface of the cloth with a roller to penetrate and defoam again.
Carbon fiber cloth construction site
Don’t be afraid of the leak of the house. Find the right person and buy the right materials to avoid repetitive construction. Nanjing Mankate Joint Sealant and Carbon Fiber Cloth are well-known in the industry. They are currently used in Nanjing Metro Line 3 and Chengya Express, China Aerospace Building, Nanjing Gulpu Hospital, Dabao'en Temple and other projects. Welcome to inquire: 400-894-5118
Editor: Nanjing Mankate, if you need to reprint, please indicate the source
Original link: https://www.njmkt.net/
