ES | CN
+86 025 8665 1110
Home >> News

Anchored planting bar adhesive is easy to pull out after construction because of these factors.

Jul. 31, 2019


 “Hey, it’s said that the anchoring effect of the anchoring adhesive is good. Why did my anchored planting rubber come out after the construction?” In the reinforcement industry, do you often hear people around you say that in fact, it is easy to pull out the anchored rubber after construction, and it is likely to be related to the following factors. We will introduce them to you.


 28_副本.jpg


Mankate received three interviews from different channels of CCTV.


 Why is it easy to pull out the anchored adhesive?


 Anchored adhesive is easy to pull out after construction, mainly for the following reasons;


 1. The drilling size does not meet the requirements;


 2. The stains in the borehole are not cleaned;


 3. The surface of the steel bar is not derusted;


 4. The anchoring rubber is not fully mixed;


 5. The amount of glue injected in the hole is insufficient;


 6. When pulled, it is pulled by external force.


 Of course, if you find a problem, you need to have a solution. For these reasons, we also summarize some countermeasures for you:


 图片9_副本.jpg


Mankate MT500 anchoring reinforced plastic, China nuclear power designated product!


 What should we do if the anchoring adhesive is easy to pull out after construction?


 1. Drill holes according to the requirements to ensure that the aperture size meets the requirements;


 2. Use a special gas cylinder and brush to clean dust and stains;


 3. Derust the surface of the steel bar and wipe it clean with a cleaning agent;


 4. Note that the anchoring adhesive is mixed well before use.


 5. Make sure there are no bubbles or voids in the hole when filling the glue;


 6. The steel bar cannot be shaken or welded during the initial stage of curing.


 图片10_副本.jpg


Look: Mankate anchoring adhesive strength is several times higher than normal. The key is that it is also slip resistant!


 If there is a problem after applying the reinforced adhesive, you should not worry. The reason is the key. Mankate has been focusing on the reinforcement industry for 16 years. We have rich experience in applying the reinforced adhesive. If you encounter problems in the reinforcement project, you can contact Mankate in time~ Mankate Anchored Adhesive, China Nuclear Power Designated Product. Mankate One Stop Service Hotline: 400-894-5118