ES | CN
+86 025 8665 1110
Home >> News

Should it be tested before the house is reinforced?

Apr. 23, 2019


The importance of the house must be felt by everyone. As a safe haven for our lives, the house gives us a great sense of security to a certain extent. The more stable the house structure is, the more easy we will undoubtedly feel. Therefore, many projects nowadays attach great importance to reinforcement engineering during construction. So some friends have proposed: Since the house reinforcement is a general project, is it necessary to carry out the test before the reinforcement? We want to tell everyone here that the house must be inspected before the reinforcement of the house. We will explain the reasons as follows.

 房.png

Carbon fiber cloth reinforcement effect

 

The house reinforcement test detects the current situation of the house before the house is strengthened. It directly reflects the safety of the main structure of the house to be strengthened through the form of the report, and provides comprehensive and professional reinforcement proposals for the later house reinforcement project to ensure that the book of the later reinforcement project goes smoothly, so a qualified house reinforcement test report will greatly promote the development of the reinforcement project, and will also make the reinforcement project more targeted and improve the reinforcement effect.

 房1.png

Carbon fiber board reinforcement effect

 

Before and after the reinforcement, the house needs to be tested for house safety and seismic detection of the house. Before the reinforcement, the structure and bearing capacity of the house should be re-examined and modeled and calculated to provide data support and suggestions for the reinforcement project and plan. After that, it is necessary to review and confirm the reinforcement status and drawings of the house to ensure the quality of the house after reinforcement and the need for housing certification. The house strength test is mainly divided into house safety test and house seismic test. Housing safety testing refers to the identification of housing safety through investigation, on-site inspection, structural analysis and verification, and is mainly applicable to houses that have been found to have safety hazards, signs of danger or other safety levels that need to be assessed. The seismic test of the house refers to the seismic capacity assessment of the house in use and the house to be reinforced, mainly by testing the current structure of the house, investigating the reinforcement plan of the house and future use, according to the requirements for seismic fortification. The seismic performance of the house was evaluated.

 房2.png

Bonded steel reinforcement effect

 

The test before the reinforcement of the house is like the diagnosis before the operation of the patient. Only when the cause of the disease is found can the effect be achieved with half the effort. The reinforcement of the house is only found where the structural problem is located, and the reinforcement plan is determined according to the test result. Reinforce the effect to avoid unnecessary waste of manpower and material resources. If you have any questions or need help in this regard, please call: 400-894-5118, we are always at your service.

 

Link to this article: https://www.njmkt.net/Article/fwjgqxyjhj.html

(Editor: Nanjing Mankate, if you need to reprint, please indicate the source)