ES | CN
+86 025 8665 1110
Home >> News

Watch out! 6 aspects need to be paid attention to when using high temperature resistant planting bar adhesive in the tunnel

Jan. 19, 2019


 The tunnel construction environment is different from other construction environments. It is generally in the mountains or underground, and the sight is poor. It needs to pull a lot of wires for illumination. And there is danger of seeping water at any time. Therefore, there is a lot of attention to be paid when using the high temperature resistant planting bar adhesive to strengthen the reinforcement.


警_副本.jpg

 

In the reinforcement of tunnels, the operators should pay attention to the high-altitude operations, electrical operations and the use of mechanical equipment, in addition to the relevant safety regulations.

  

1. The operator must undergo professional training and understand the operation procedures of the tunnel high temperature resistant planting bar adhesive reinforcement.

 

2. The operator must wear protective equipment according to the working environment and concentrate on the operation.

 

3. The scaffolding for operation should be firm and reliable, and there should be protective railings around. There should be an electric shock protection device. It is strictly forbidden to mix the neutral wire and the phase wire to avoid electric shock caused by the connection of the phase wire and the structural steel bar.

 

4. Electrical equipment and erection shall comply with the regulations for safe use of electricity. There shall be a grounding electric shock protection device. It is strictly forbidden to mix the zero line and the phase line to avoid electric shock caused by the connection of the phase line and the structural steel bar.

 

5, High temperature resistant planting bar adhesive, acetone and other things should be kept safely, and they should have waterproof, explosion-proof measures. The residue should be treated in a centralized manner according to the designated location after container is cleaned. However, if you purchase Mankate underwater high temperature resistant planting bar adhesive, you don't have this trouble. Mankate's underwater high-temperature resistant reinforced adhesive can be applied in dry, humid and other conventional environments. It can be applied on underwater base or even underwater under 500 meters. It is easy to operate and has the same effect as pre-buried.

 

6. The operating environment should be ventilated and have sufficient illumination. Similarly, Mankate Technology's underwater high temperature resistant planting bar adhesive is mainly composed of modified bisphenol resin, which is styrene-free, odor-free and non-toxic. It has the characteristics of long construction time, rapid load bearing, anti-vibration, anti-shock, fatigue resistance, anti-humid and heat aging, acid and alkali resistance, no creep, etc,.


警1_副本.jpg

 

If you are interested in the tunnel reinforcement products, please call our one-stop service hotline: 400-894-5118.

 

Link to this article: https://www.njmkt.net/Article/jtsdzsyzjj.html

(Editor: Nanjing Mankate, if you need to reprint, please indicate the source)