ES | CN
+86 025 8665 1110
Home >> News

What is the problem of planting bar adhesive in one day without coagulation?

Dec. 08, 2018


There are roughly three related factors regarding the solidification time of the planting bar adhesive:

1. The amount of curing agent. The lower the amount of curing agent, the longer the curing time required, and the curing effect is not ideal, but the specific ratio of curing agent and planting bar rubber should be contacted by the manufacturer.

2. The temperature of the surrounding environment. The lower the ambient temperature is, the longer the gelation time will solidify. If the temperature is too low, the colloid will solidify very slowly, or the solidification will not be complete, and the steel will be easily pulled out.

3, Some planting bar adhesive is divided into summer formula and winter formula. Don't make mistakes when using it. Because the summer temperature is too high for the winter formula, and the curing is very fast. And the summer glue can not be used in the winter. The curing is very slow, and the glue becomes thick and difficult to stir.


Therefore, it is very important when selecting the manufacturer of planting bar adhesive. Choosing the right glue not only guarantees safety, but also saves a lot of things when used later. The most trouble-free and most secure in the later period is the enterprise that can provide the design of the project and the construction guidance of the whole process. This one-stop service allows the construction team to have more confidence in the quality of the project. Nanjing Mankate is recommended on these two points.


20181204142830_9125.jpg


First look at the advantages of Mankate’s self-developed and self- produced reinforced rubber compared to other manufacturers' reinforced rubber:

1. Mankate reinforced rubber has strong seawater resistance and can be cured in water.

2, Mankate reinforced rubber meets all-weather working conditions, and can be used in impact drills and pumping wet holes.

3, Mankate reinforced rubber almost can be applied in any hole diameter and implant depth.

4, Mankate planting bar rubber has a strong anchoring force.

5, Mankate planting bar rubber has high compressive strength and high bearing capacity.

6. Mankate reinforced adhesive has higher strength than concrete around it when it is cured.

7. There is almost no shrinkage during the curing process of Mankate reinforced rubber.

8. The influence of the aperture of Mankate’s implanted rubber on the anchoring force is small. When the small-sized anchor is implanted into the large-sized borehole, the anchoring and bonding force can be enhanced.

9. Mankate reinforced rubber can be used for solid concrete and granite.

10, Mankate reinforced rubber is a product to meet a variety of substrate applications.

11. Mankate planting bar rubber is fully mixed by the mixer, and the glue injection construction is convenient and simple.

12. Mankate planting bar adhesive has good bonding properties with most structural materials.

13, Mankate planting bar glue can be applied on dry, wet, underwater base.

14, Mankate planting bar rubber does not crystallize and can be cured at low temperature.


20181203153940_5059_副本.jpg


Mankate has a research and development team that cooperates with foreign experts. It also provides one-stop service for pre-sales, after-sales, and during-sales. On-site guidance and program design... If you want to know more about the planting bar adhesive produced by Mankate, you can directly consult. Online customer service or call customer service hotline: 400-894-5118 for telephone consultation.

 

Link to this article: https://www.njmkt.net/Article/zjjytmngsz.html

(Editor: Nanjing Mankate, if you need to reprint, please indicate the source)