ES | CN
+86 025 8665 1110
Home >> News

Swimming pool reinforcement methods

Nov. 17, 2018

At present, many communities or gyms have additional swimming pools, but these swimming pools are not on the ground, but on the terraces or upstairs. However, many buildings do not have a gym or swimming pool in advance, which are added later. This will endanger the bearing and waterproofing of the floor. It is recommended to use Nanjing Mankate carbon fiber cloth with the planting bar adhesive which can be constructed underwater.

Adding a swimming pool between the floors is a great challenge to the building's later reinforcement. Why do we recommend carbon fiber cloth with the planting bar adhesive? The reasons are as follows.


1. To make the pool reinforcement, first consider waterproofing, because there will be corrosion in places where there is water. Nanjing Mankate carbon fiber cloth is corrosion-resistant, aging-resistant, has good water resistance, and is suitable for underwater construction. Mankate planting bar adhesive can be applied on dry, wet and underwater base even at low temperature or underwater. It can be solidified at a low temperature or underwater without crystallizing.


2. Do not change the original structure of the building. If you use the planting bar or increasing the section method, it will destroy the original structure. Many pools are added later, so it is impossible to build a large number of buildings in the office building. We choose some methods that do not damage the original structure. Mankate carbon fiber tow is straight and it has flat surface, high strength, high modulus of elasticity and can be bent and wound. It is suitable for all kinds of curved surfaces and special-shaped members without increasing the weight of the components and without changing the cross-section dimensions of the components.


3. Mankate’s MT500 underwater planting bar adhesive uses Taiwan's South Asia epoxy resin, which is non-toxic and has no odor. It has the advantages of earthquake resistance and impact resistance. The main thing is that it has high water resistance and can be cured in water.



2.png



Therefore, if you want to put a swimming pool between the floors, you should fully consider the load-bearing and waterproof conditions when doing reinforcement. Nanjing Mankate carbon fiber cloth and planting bar adhesive are very good choices for you. It can be waterproof, and it can bear the weight. It is good for both. Welcome to place an order: 400-894-5118

Editor: Nanjing Mankate, if you need to reprint, please indicate the source!

Original link: https://www.njmkt.net/