In the previous articles of Mankate, we have already introduced many methods of reinforced adhesive reinforcement. Today we would like to talk about the matters that need to be paid attention to after the reinforcement of the reinforced adhesive. We have seen many construction projects that after the reinforcement of the reinforced adhesive, it is not maintained, and maintenance is not carried out according to the precautions, resulting in a great compromise in the quality of the project.
1. Many construction teams are directly welded on the top after the reinforcement of the reinforced adhesive, and the welded part and the root of the steel are very close, which easily leads to the melting of the planting bar adhesive colloid, which does not reach the original strength. The quality of the project has certain side effects.
2. When doing planting bars reinforcement, be sure to keep the base surface dry. This is very important. If you can, it is best not to do the reinforcement in the rain or snow because the air humidity is high.
3. The surface of the steel used should not have impurities. If there is rust, it must be removed first, and no impurities such as sediment can be adhered.
4. After inserting the adhesive into the steel bar, do not always rotate or move the steel bar. We have seen that many construction teams after the reinforcement of the planting bar adhesive, they can't wait to strike on it and continue processing. The effect is greatly reduced, and it should wait until it is naturally cured before proceeding to the next process.
5. Pay attention to the change of temperature. Generally, the planting bar adhesive has summer formula and winter formula. When used, the winter formula glue should not be used in summer, because the temperature in summer is too high for the winter formula glue, and the curing is very fast. Summer glue should not be used in winter for the reason that the curing is very slow. Besides, the glue becomes very thick and difficult to stir.
Nanjing Mankate reinforced adhesive, which can be used underwater and can be solidified in water to meet allweather working conditions and also can be used in impact drills and pumping wet holes. It will save a lot of trouble. If you don't have the patience to do the maintenance work after the planting, just use Mankate planting bar adhesive!
Tel: 400-894-5118
Editor: Nanjing Mankate
Article link: https://www.njmkt.net/
