ES | CN
+86 025 8665 1110
Home >> News

Wrong carbon fiber construction method is hurting your project quality.

Aug. 01, 2018


Carbon fiber cloth is a new type of material that has gradually shifted from the previous aerospace industry to the civilian sector. During continuous use, it has been found that carbon fiber cloth is light and thin but has strong tensile properties, and because of the characteristics of carbon fiber, the carbon fiber cloth is also resistant to corrosion and acid and alkali. Therefore, people have applied it to the field of reinforcement, which made carbon fiber cloth play a greater role. However, the wrong construction method can not only damage the excellent characteristics of the carbon fiber cloth, but will result in problems in the quality of the project. Therefore, understanding the correct carbon fiber cloth construction method should be what the construction workers should do. The following is a brief introduction to the construction method of the carbon fiber cloth.

 

carbon fiber cloth_副本.jpg



The first is to carry out the base surface treatment, remove the uneven part of the polishing → then roll the underlying epoxy resin, correct the inconsistent ink line → then roll the epoxy resin impregnated glue → then the key step to paste the carbon fiber cloth → to ensure the bonding of the carbon fiber cloth is reliable, it is required to be repeated by the roller coating, the defoaming and the roll coating of the epoxy resin impregnating glue twice, and finally the effect of the carbon fiber cloth is closely adhered to → the final step is sandblasting so that the surface reinforced by the carbon fiber cloth is beautiful and neat.

 

After the carbon fiber cloth is pasted, the quality of the bonding can be inspected. The bonding quality between the carbon fiber cloth and the concrete can be checked by tapping with a small hammer or by hand pressing the surface of the carbon fiber cloth. The total effective bonding area should not be lower than 95%.

In addition to using correct carbon fiber cloth construction method to ensure the quality of the project, high quality carbon fiber cloth is also essential. The carbon fiber cloth produced by Nanjing Mankate is of high quality. It has adopted imported Dongli carbon wire with high flatness, and the cutting is not scattered, and the company provides free calculation books and free engineering guidance, which is a good helper for your reinforcement project.

Editor: Nanjing Mankate, if you need to reprint, please indicate the source!

Original link: https://www.njmkt.net/Article/sgybkcwdtx.html