ES | CN
+86 025 8665 1110
Home >> News

What to do if the pipelines corrode? Reinforced with carbon fiber cloth.

May. 26, 2018


Due to its unique characteristics, pipelines are widely used in many industries and fields. After the pipeline has been used for a long time, problems such as corrosion or damage will occur. What should we do at this time? It takes too much time and money to replace pipelines in large numbers. Is there a better way?

 

We know that carbon fiber cloth is a good reinforcing material, and besides reinforcing the buildings, it can also reinforce the pipeline. Carbon fiber cloth not only has the inherent characteristics of carbon materials, but also the soft processability of textile fibers. Therefore, carbon fiber reinforcement technology has higher safety, reliability, and adaptability than other types of repair technology such as pipe replacement and welding.

In addition to reinforcing the defects, carbon fiber reinforcement technology can also be used to boost pressure-free pipelines. This is a new type of non-destructive repair technology. Reinforcing fiber and matrix resin are used to form a composite reinforcement layer outside the pipeline to share the load on the pipeline. The construction is simple and quick. It can be operated with pressure, and the safety risk is small.

 

Although the use of carbon fiber reinforced pipe has many advantages, if the pipeline can use it to remedy, the repair process is simple and it does not require welding or hot; but also it can save a lot of costs. How to choose a good carbon fiber cloth is crucial.

 

The carbon fiber cloth produced by Nanjing Mankate is made of imported carbon fiber yarns. The strength is as high as 3,800 MPa, which is 7 to 10 times higher than steel. And the monofilament strength is as high as 5019 MPa. The flatness is high and the cutting is not scattered. The corrosion resistance is good, and the dipping effect is good too. The commonly used carbon fiber cloth has a weight of only a few hundred grams per square meter and can be formed integrally with the pipeline to carry the pressure within the tube and allow the pressure bearing capacity of the final composite restoration layer to reach and exceed the pressure capacity of the original pipeline.


2018.5.26.jpg

 

After expert assessment and on-site verification, it is agreed that the reinforcement repair technology of carbon fiber pipe is a safe and reliable reinforcement repair technology, which can be used in conjunction with the current status of pipelines. It can be used to repair corrosion, cracks, mechanical damage, weld defects, geometric defects and the repair of the material defects of the pipeline, but also can be used for temporary reinforcement of the internal corrosion of the pipe; for single-point defect reinforcement and the overall pipeline defects reinforcement.

If you have any other questions about carbon fiber reinforced pipe, please call Nanjing Mankate. Mankate has the same testing equipment as the testing center.

You can come to the factory to see the tensile strength, elastic modulus and elongation testing of carbon fiber cloth. You can place orders at ease after you see the satisfactory datas.

Free hotline: 400-894-5118

Editor: Nanjing Mankate

Copyright belongs to www.njmkt.net, for reprint, please indicate the source!