ES | CN
+86 025 8665 1110
Home >> News

How to do the anchorage reinforcement at low temperature?

Mar. 24, 2018

Recently, Denmark experienced a cold spell. The temperature is below zero degrees Celsius. And even some of the local houses were frozen. This caused many houses to suffer from freezing and water corrosion. After warming up, they need to do house reinforcement. However, the following problem is that there is snow melting in the low temperature and rebar holes, and it is difficult to cure the adhesive. So today we'll introduce you Nanjing Mankate anchorage adhesive that can be used in low temperature and humid environment.

 

2018.3.23.1.jpg

Mankate anchorage adhesive is an underwater adhesive. According to the specification for underwater curing in GB 50728-2011, “Technical Specification for Safety Evaluation of Reinforcing Materials for Engineering Structures”, the definition of underwater adhesive can be used in 5°C environment. It can be cured in wet conditions or even under water.

Nanjing Mankate anchorage adhesive adopts Taiwan South Asian epoxy resin. It has strong anchorage, acid and alkali resistance, high and low temperature resistance, and aging resistance for 50 years. It can be used in the dry, wet or underwater base. It has no crystallization and can be cured at low temperature.


Nanjing Mankate anchorage adhesive solves the problem of strengthening in winter and in the wet environment. It is suitable for the reinforcement of concrete and rebar or chemical screws under wet, underwater and dry conditions. Welcome customers to come to purchase.

Hotline: 400-894-5118!

Editor: Nanjing Mankate

Copyright is owned by www.njmkt.net. For reprint, please indicate the source!