NJMKT Carbon Fiber Plate Adhesive (MKT-CFP/A)

Features:

*Excellent thixotropy, non-drip for horizontal, vertical and overhead applications in vibration condition 

*Very good resistance to age, chemical corrosion and water

*Good performance of damp-heat aging and freeze-thaw resistance

*There is nearly no shrinkage after cure time, wide range of mixing proportion, reasonable operable time

*Free of ethylenediamine, nearly odorless, non-toxic

*Excellent properties of bonding strength, toughness, peeling strength and impact resistance

*Fast and easy stirring ensures accurate mixing proportion, when properly mixed, adhesive will be an even color for use

*Mixed adhesive should be used up within 30 minutes (depending on specific ambient temperature), the density is about 1.60~1.63 g/cm3 (cured), gel time is about 2~6 hours

*Specially developed for dynamic load environment, bond the plate to concrete structure, masonry structure, bridge beam, column, etc. to improve load capacity

Instruction:

*Mix the two-component adhesive well according to its weight proportion of Component A: Component B = 2:1 strictly. When properly mixed, adhesive will be an even color for use, the mixed adhesive is better to be used up within applicable period (about 30 minutes).

*Perfect permeability to the bonding surface of concrete and carbon fiber plate, during pasting, according to width direction of plate, pasting adhesive thick in the middle and thin in the both sides, then scrape to required adhesive thickness (adhesive thickness depends on the flatness of bonding surface of existing structure ).

Cure maintenance:

*Carbon fiber plate adhesive can be cured to 70% in one day in the operating temperature of ≥25℃, it can bear load after three days; When the operating temperature is about 5 ℃,the cure time is relatively extended, two days is 70%, five days for load bearing; if the temperature is below 5℃, you should deal with thermal curing process or you can use our special low temperature adhesive depending on your installation condition 

Caution:

*Mix the adhesive well according to its weight proportion strictly

*Construction crew should take steps of protective measures to keep it from eyes

*Remaining adhesive cannot be poured into original barrels

Packing: 

*Two kinds of packing: 45kg (A+B two barrels)/pair; 10kg (A+B two barrels)/pair

Storage:

*Shelf life: At least 12 months from date of manufacture in unopened container when store in dry and well-ventilated place. Please store in ambient temperature from 5 ℃ to 40 ℃, away from open flame, heating devices

*Adhesive specialized for low temperature can be stored in ambient temperature from -5 ℃ to 40 ℃

*Handle with care, protect from rain, sunlight and place upward during loading and unloading transportation 

Operating environment:

*Dry condition

*Wet condition

*Underwater condition

Standard: GB50367-2013, GB50728-2011

NJMKT promises to meet the technical requirements of the following GB50367-2013 "Design code for concrete structure reinforcement" and GB50728-2011 "Technical code for safety identification of reinforcement materials for engineering structures".