NJMKT Dismountable ATM Anti-theft Foundation Anchor Bolt

Schematic Diagram

Specification

NJMKT company can provide product design and customized specification according to customer’s requirement.  

Installation guide

During installation, drill the hole to proper depth and diameter per specifications using ordinary impact drill. Enlarge the hole using a special tool. Embed this anchor, calibrate the embedment depth, tighten the foundation anchor plate and the cone head causes the bolt to lift, then push the blade to the wall of cone hole until the hole wall, blade and expansion head fit together. Then tighten the auxiliary nut to finish the installation. Screw the adjusting nut onto the bolt, then place ATM equipment foundation to the bolt and adjust the horizontal level. Screw the fixed special nut to finish the installation.

During removing this anchor, please loosen and disassemble the nuts, remove the foundation anchor plate, then hammer the bolt slightly and lift by a special tool to take out the bolt to finish the removal.

Note:

1. If you do not know this invention well , please do not remove this product by yourself, because it will result in improper removal, even out of operation.

2. It is only suitable for concrete greater than C25 , and the thickness of concrete is 1 cm greater than the embedment depth. 

After-sales service 

We provide free service including customized product design, on-site technical guidance and support for installation and removal. 

Important announcement: This is NJMKT company independent research patent and we have already been approved and issued "patent certificate" by the State Intellectual Property Office. It must not be copied, reproduced, transmitted or disclosed without the prior written permission or authorization of NJMKT.

Standard Specification